Thursday, 28 November 2019

Pokemon Sword and Shield: How to evolve Yamask and catch Eternatus?


Pokémon Sword and Shield is out and the game has had its fair share of controversies as well. However, the post is not about it as we will tell you how to catch Eternatus and evolve Yamask as well. In case you intend to do so, then read the blog carefully.

How to Navigate Eternatus
Catching Eternatus is mandatory to finish this game and everybody can encounter Eternatus at the end of the game. First, you need to defeat all the eight gym leaders and then you will proceed towards the Wyndon’s Champion cup finals. After you challenged Leon in the finals, the game will be stopped, and it will teleport you straightly to the Hammerlocke. In the Hammerlocke, you need to locate the gym. After entering the gym, you would see the Energy Plant. Move toward it and after a while there you will have an encounter with Eternatus.
How to Get Eternatus in your Pokéball
After your battle with Eternatus begins, use Pokémon of ice, ground, and psychic types. These types are the weakness of Eternatus and remember after you defeat Eternatus the max Raid battle will begin.
In the battle, all your Pokémon attacks will be paralyzed, so wait till the Zacian and Zamazenta appear. Now, you need to defeat all the two rival Pokémon beside Eternatus. After you defeat all these three Pokémon together, you can easily catch the Eternatus. Use any Pokéball to catch it and once you have Eternatus in your team, only then you can proceed towards the end of the game.
Evolve the Yamask in Galarian Region
The evolution process for every Pokémon in the Pokémon Sword and Shield is straightforward and easy to do. In the new game version, the Galarian region has several varieties of Pokémon. Almost everyone here has a similar evolution method except the Yamask; its intricate appearance and evolution method is tough to get in this version of the game. To evolve the Yamask first, you need to get it hurt in the battle, and then you need to migrate to some particular place. Here is the proper workaround to execute the process of evolution for Yamask.
How to Catch the Yamask in Galarian region
Catching a Yamask is not that complex and you can easily locate or encounter Yamask in Route9. You can also encounter them in max Raid battles. After your Pokémon defeats Yamask, catch it in your Pokeball.
How to get a Unovan Yamask back
Several Pokémon from the previous version intrigues the gamers, while some of the new appearances aren’t satisfying. A similar case is with the Yamask, as the new Yamask appearance is weird, and several gamers wish to get back the Yamask’s previous version appearance. To do this, you need to go to Ballonlea Gym, there a kid will trade with you for an Unovan Yamask in exchange of Galarian Yamask.
Guide For Evolving Yamask
1.       Take out the Yamask from the Pokeball and send it out in the battle.
2.       You need to get Yamask hurt till it receives the damage nearly around 49 and make sure Yamask does not faint.
3.       After the battle ends, wait a couple of minutes before healing Yamask.
4.       Migrate towards any area in Hammerlocke alongside the damaged Yamask.
5.       Now, you need to enter into the Dusty Bowl.
6.       After entering into the Dusty Bowl, you need to locate a wide stone arch situated beside the Dusty Bowl.
7.       Now, you need to walk under the wide stone arch with the damaged Yamask.
8.       After a couple of seconds, you will get a prompt on your screen for the beginning of the evolution process of the Yamask.
9.       Your wait is almost over, and your Yamask will now evolve into Runerigus.

Victoria Parker, writer of this blog loves to write and create awareness related to day-to-day internet threats. Major topics of her interest are printer support like hp printer support, canon printer support, dell printer support, etc. 

Wednesday, 20 November 2019

How to install TVOS 13.3 Beta 2 on Apple TV?


Apple has created two beta versions for the tvOS and they are designed especially for the developers for the testing task. Although it is legal to test the beta, still, the process to download and install it is complex. If you are a developer and are facing a bit of problem, then follow the steps mentioned below:
There is two possible way to install a tvOS beta on the Apple TV:
·         Via over the air.
·         Via USB-C.



Installing the tvOS 13.3 Beta 2 via Over-the-Air
You need a Mac for installing the tvOS beta. Use the Xcode of the latest version if you are doing this for the first time. The apps and the configuration will remain on the Apple TV device for further follow steps down below:
1.       Open your Mac.
2.       Tap on the developer.apple.com/ option.
3.       Tap the Discover option.
4.       Type the username and password details in the login tab.
5.       Hover down and select the Download tab appearing blue to the right of tvOS 13 beta configuration profile.
6.       Don’t forget to save the file to your desktop.
7.       Open the Mac App Store and install the Apple configuration app.
8.       Connect the Apple TV device to the AC power output.
9.       Connect the Apple TV to the wireless network you are using on Mac.
10.   Launch the Xcode on the Mac and if your Mac is running on an outdated OS version, then upgrade the OS before proceeding further.
11.   Select the Window tab from the menu bar option.
12.   Choose Devices and Simulators.
13.   Now, launch the Settings on the Apple TV.
14.   Choose Remote and Devices from the following option.
15.   Press Remote App and Devices.
16.   Go back to Xcode and select the Apple TV option; it will be under the Discovered tab.
17.   Now, a code will appear on the display screen of Apple TV.
18.   Apply the code in the following option; it will pair Xcode and Apple TV.
19.   Now, go to Apple Configurator on Mac, choose the Apple TV option.
20.   Move the tvOS 13 configuration Profile to the Apple Configurator.
21.   Your Apple TV has been configured for the tvOS 13.3 betas 2.

Installing the tvOS 13.3 beta 2 restore image via USB-C
You can use the procedure of USB-C only if you have 4th generation Apple TV. Here are the steps:
1.       Open the Mac.
2.       Tap on the developer.apple.com/ link from the option.
3.       Select the Discover tab.
4.       Choose the tvOS option.
5.       Enter your developer password and username in the login tab.
6.       Tap the tvOS 13 restore image on the Apple TV.
7.       Select the Application option available on the top.
8.       Choose the Download button that is appearing blue from the right side of Xcode.
9.       You need to install the Xcode11 on the Mac.
10.   Connect the Apple TV device to the AC power output.
11.   Sync your Apple TV to the Mac with a USB-C cable.
12.   Open iTunes on the device.
13.   Press the Option key and tap on Check for Updates.
14.   Now, select the downloaded tvOS 13 beta file.
15.   Now, iTunes will be upgraded on your Apple TV.

Victoria Parker, writer of this blog loves to write and create awareness related to day-to-day internet threats. Major topics of her interest are printer support like brother printer support, canon printer support, dell printer support, etc. 

Tuesday, 1 October 2019

How to remove Elara App from Windows 10?


Elara is an application which is already installed on a new Windows 10 computer. It helps you to increase the functionality of the pointing device. But many users are complaining that this application shuts down the Windows 10 computer continuously. In this article, you will get to know the steps to remove Elara application from your Windows PC.

Here’s how to remove Elara app from Windows 10
·         Checking the Windows 10 and touchpad driver updates

1.    Find the Settings tab.
2.    It is located on the Start option.
3.    You need to launch the Start option. 
4.    Go to the Update and Security menu.
5.    After that, choose the Check for Updates option.
6.    The computer will begin the downloading procedure of all the new updates. 
7.    Wait till the computer finishes the installation process. 
8.    Click on the Windows key and X key together.
9.    After that, press on the Device Manager menu
10.  It is located on the menu list of all the available options.
11.  Click on the Mice option. 
12.  Go to any other pointing devices column.
13.  You need to right-click on the driver 
14.  After that, press on the Update driver menu.
15.  Then, choose the Search automatically for updated driver software option.
16.  You need to do this procedure again for updating the drivers mentioned below this column.
17.  Additionally, you need to start downloading the new updates manually by going to the hardware manufacturer’s official site.
18.  Start rebooting the computer to apply the changes you have done.

·         Creating the Registry key

1.    Click on the Windows and R keys together.
2.    It will launch the Run prompt box on display. 
3.    Enter regedit in the box.
4.    After that, and press on the Enter option.
5.    It will launch the Registry Editor menu.
6.    After opening the Registry Editor menu, go to the HKEY_CURRENT_USERControl PanelDesktop key which is located in the left-hand panel.


7.    Go to the right-hand corner of the menu.
8.    After that, you need to right-click on the empty area.
9.    Press on the New option.
10.  Click on the DWORD (32-bit) Value. 
11.  Provide the title to the AutoEndTasks.
12.  After that, changes into the one value.
13.  Press on the OK option for saving the changes you have done.
14.  After that, exit from the Registry Editor menu.

·         Removing the Elara app from PC

1.    Find the Control Panel menu.
2.    Press on Uninstall a Program option.
3.    It is located on the Programs column.
4.    Find the Elara application.
5.    Otherwise, find the virus-infected software which you will get in the menu list of all the software which are already installed.
6.    Start uninstalling all the software.
7.    At last, press on the OK option.

·         Removing the Elara app from the Google Chrome browser

1.    Open the Google Chrome browsing application for removing extensions.
2.    Click on the three dots symbol.
3.    Press on the More tools option.
4.    Click on the Extensions menu.

5.    After that, start removing the unwanted extensions separately through the trash symbol.
6.    Exit from the default browser.

Victoria Parker, writer of this blog loves to write and create awareness related to day-to-day internet threats. Major topics of her interest are printer support like lexmark printer support, canon printer support, dell printer support, etc. 

Thursday, 26 September 2019

How to prevent MAC from asking for login repeatedly?


In this world of digital information, people have all their crucial information in their computer. Therefore, to keep your information and data safe and secure, you may have set a password or your device. But, it is also irritating when you are asked to enter the password over and over again. Mac also asks for the login password every time you start it, wake up, and switch user. If you don’t want to fill the password every time when you wake up your Mac from sleep or switch users, then you can disable the login password separately for each. 
Disabling the startup login on Mac
To skip the login screen that appears when you start your Mac, you can use automatic log in. Enabling this feature, skip the user selection as well as password screen. In order to enable automatic login, FileVault should be disabled in your Mac. Here is how to disable FileVault and turn on automatic login in Mac.
Steps to disable FileVault:
1.       Start your Mac and open ‘System Preferences.’
2.       Open ‘Security & Privacy.’
3.       Now, find and select ‘FileVault.’
4.       Type your Mac password when prompted.
5.       Then select ‘Turn Off FileVault.’
Once FileVault has been disabled in your Mac, you can go ahead and enable automatic login.
Steps to enable automatic login in your Mac:
1.       Open ‘System Preferences.’
2.       And jump into ‘Users & Groups’.
3.       Now, type your Mac password when prompted.
4.       Go to ‘Login Options’
5.       Look for Automatic Login option and click its dropdown button.
6.       Choose your user account from the dropdown list.
7.       And, provide the login password.
Automatic login will be enabled in your Mac, and you’ll not be asked for login. You’ll not even see the login screen. If you’ve different users in your Mac, then you can access them from the top menu pane. If you’re unable to enable automatic login in your Mac, then possibly you’re using iCloud account password for logging in to your device. You’ll need to change the login password in order to enable automatic login.
Disabling the wake-up login on Mac
After a few minutes, Mac goes to sleep in order to save power and protect the display. When you wake up your Mac from sleep, it will ask you again to login with your password, which is annoying many times. If you don’t want Mac to ask you for the password at wake up, then you’ll need to adjust the settings for it into Security & Privacy section of System Preferences. You can disable the wake-up login entirely as well as increase the locking time. Here is how.
1.       Open ‘System Preferences.’
2.       And jump into ‘Security & Privacy.’
3.       Go to ‘General.’
4.       Now, type your Mac password when prompted.
5.       Click and unmark the ‘Disable automatic login’ box.
6.       Click the dropdown button.
7.       Choose your user account from the dropdown list.
8.       And, provide the login password.
9.       Click ‘OK.’
10.   Now, click and unmark the ‘Require password’ box.
11.   Type the administrator password of your Mac.
12.   Now, choose a time to lock your Mac after sleeping or choose ‘Turn off Screen Lock’ to disable the wake-up login
13.   Choose the other options and save changes.
Now, after going to sleep, your Mac will lock after your determined time or not lock if you’ve turned the screen lock off.
Disabling the switch users log in on Mac
Even after disabling start up and wake up logins, your Mac still asks for login password when you switch users or change administrator settings. If you want to prevent Mac from asking for switch user login, then you’ll need to create a blank password for that account.
1.       Open ‘System Preferences.’
2.       And jump into ‘Users & Groups’.
3.       Now, type your Mac password when prompted.
4.       Select your username in the left menu.
5.       Click ‘Change Password.’
6.       Type your current password in the Old password field.
7.       And leave the New password and Verify field blank.
8.       Then click ‘Change Password.’
Now, you’ll be not asked for any password to access your account. You just have to click your user account icon to access your desktop.
Victoria Parker, writer of this blog loves to write and create awareness related to day-to-day internet threats. Major topics of her interest are printer support like hp printer support, canon printer support, dell printer support, etc.